
When to outsource cleanroom disinfection
- Out-of-limit results in environmental monitoring of air or surfaces.
- Fungi or mold in the production area that keep coming back despite routine disinfection.
- After refurbishment, upgrade or construction of an area – before requalification.
- After a technical shutdown, HEPA filter replacement or HVAC maintenance.
- At product changeover and after the end of production.
- At a change of program or client in a multi-product facility, e.g. at a CDMO.
- Before an inspection or audit, when you want certainty about the microbiological status of the area.
- In biotech: after contamination of cell cultures and when the research program changes.
What we disinfect
- Cleanrooms of all grades – A, B, C and D under EU GMP Annex 1 (ISO 5–8 under ISO 14644-1) – and aseptic areas.
- Production lines together with machinery and equipment.
- Quality control and microbiology laboratories.
- Material and personnel airlocks.
- Biosafety cabinets and sterile workstations.
- Cell culture suites, incubators and bioreactor rooms.
- Raw material stores, ventilation ducts and HEPA filter housings.
Decontamination for CDMOs and biologics manufacturers
CDMOs manufacture many products and programs for different clients in the same facilities. Every program change, technology transfer or new campaign requires confidence that the area is free of microorganisms and residues from the previous process – and downtime has to be as short as possible. We carry out bio-decontamination:
- at product or client program changeover in multi-product facilities,
- before technology transfer and the start-up of a new process,
- in cell culture suites, cell bank rooms and areas with single-use bioreactors,
- in quality control and microbiology laboratories,
- before area qualification and process validation, and before regulatory inspections and client audits.
Hydrogen peroxide vapor penetrates the inside of equipment and leaves no residues that could affect the next product. The concentration and humidity report for each cycle is easy to attach to changeover documentation and to show to a client auditor or an inspector. We know CDMO realities first-hand: one of our largest clients is a Polish CDMO manufacturing biologics.
Gas reaches where cheaper methods can’t
Manual wiping of large volumes is labor-intensive, difficult to validate and never covers every surface. Fogging sprays droplets that fall and settle unevenly, so some surfaces remain out of reach. Fumigation with formaldehyde, once common, has largely been abandoned by the industry.
Hydrogen peroxide vapor behaves differently: as a gas it fills the entire room and reaches everywhere – into gaps, the recesses of a production line and the inside of equipment. That is why it is the most effective technology among room disinfection methods. The dry process does not condense on equipment, so production and measuring instruments stay in place. After aeration the hydrogen peroxide breaks down into water and oxygen, and the room returns to use with no residues. See our comparison of decontamination methods.
EU GMP Annex 1 and room decontamination
The revised EU GMP Annex 1, in force since 25 August 2023, places stronger emphasis on validated bio-decontamination methods and on the disinfection program as part of the contamination control strategy (CCS). Hydrogen peroxide vapor fits these requirements well: it is sporicidal, automated and reproducible.
Efficacy can be verified with chemical indicators and biological indicators carrying Geobacillus stearothermophilus spores. After every cycle we provide a detailed report with hydrogen peroxide concentration and humidity graphs for the entire cycle. A cycle is considered effective when the required concentration is reached and maintained for the required time. Such a record is easy to include in your documentation and to defend during an inspection.
What to do when environmental monitoring shows an excursion is covered in our guide out-of-limit results in microbiological environmental monitoring – what next: alert vs action limits, investigation, CAPA and when room decontamination makes sense.
A service instead of your own equipment
A professional hydrogen peroxide vapor generator costs several hundred thousand złoty. On top of that come operator training, cycle validation, servicing and consumables. When decontamination is needed a few times a year, outsourcing it to specialists is usually simpler and cheaper. We arrive fully equipped, run the entire process and hand over the report. You focus on production. Since 2009 we have worked for pharmaceutical plants, biotech companies and laboratories across Poland. We also work for international groups at their production sites in other European countries.
How an order works
- Contact and site survey. We establish room volumes, materials, equipment and the acceptable downtime.
- Cycle plan. We set the process parameters for the room. If you verify efficacy with indicators, we point out the most challenging locations for placing them.
- Decontamination. We are flexible on timing: we also work at night, at weekends and during planned shutdowns.
- Aeration and report. We hand the area back once the concentration has fallen below 1 ppm, together with a report showing concentration and humidity graphs.
From our projects




Frequently asked questions about cleanroom disinfection
Does hydrogen peroxide disinfection meet EU GMP Annex 1 requirements?
Annex 1 does not prescribe a single method, but it requires a validated disinfection program that includes sporicidal agents. VHP is sporicidal and automated, and the concentration report makes it easier to describe the process in your contamination control strategy.
Can you carry out decontamination at night or at the weekend?
Yes. We are flexible on timing and adapt to your production schedule.
Do the production line and equipment have to be dismantled?
No. The gas reaches the inside of machines, and the dry process does not condense on equipment, so everything stays in place.
How is efficacy verified?
Efficacy can be verified with chemical indicators and biological indicators carrying Geobacillus stearothermophilus spores. We provide a report with concentration and humidity graphs for the entire process.
Do you work for CDMOs?
Yes. We decontaminate areas at product or client program changeover, before technology transfer, qualification and inspections. One of our largest clients is a Polish CDMO manufacturing biologics.
Find more answers in our decontamination FAQ.
Out-of-limit results or a planned shutdown? Call +48 Call us and we will prepare a decontamination plan.




